CLP
2
Application Instructions
Piezoelectric force washers of the CLP type series are suitable for measuring
compressive forces. Because they provide highly accurate dynamic and
quasi‐static force measurements, they must be handled very carefully.
Particular care must be taken when transporting and installing the devices.
Dropping or knocking the transducer may cause permanent damage.
The transducers are extremely rigid and have a high natural frequency.
The Specifications (VDI/VDE/DKD 2638) section on page 17 lists the
permissible limits for mechanical, thermal and electrical stress. It is essential
to take these limits into account when planning the measuring set‐up, during
installation and, ultimately, during operation.
A3616-1.0 en/de/fr
9
HBM