Connection - HBM PACEline CLP-Serie Montageanleitung

16
Force washer For screw type
1-CLP/7kN
1-CLP/26kN
1-CLP/62kN
6

Connection

Sensors of series CLP are delivered with a permanently integrated connection
cable 1 m in length. You can use a coupling (for example coupling 1-CCO
available from HBM) to connect an extension cable.
Handle the transducer connection cable carefully as it cannot be repaired. If it
is damaged, the complete sensor must be replaced.
CMD charge amplifier
HBM
Recommended
see ISO 4762
pre‐stress
force in N
M4 x 0.7
M8 x 1.25
M12 x 1.75
Tightening
torque
in Nm
7 1.5
18 9.4
30 32.4
CLP piezoelectric force washer
CLP
Minimum thread
reach
in mm
5
10
15
A3616-1.0 en/de/fr