Maintenance, Inspection, Repair; Disposal - Balluff Bvs003P Betriebsanleitung

BVS SL-_1280Z00-07-000
SMARTCAMERA Lite
2.2.4

Maintenance, inspection, repair

The working principle used in this SMARTCAMERA is maintenance- and wear-free. The operator must regularly inspect
the SMARTCAMERA for signs of damage or malfunctions in line with the operating conditions and environmental influ-
ences. If any damage or wear is found, the SMARTCAMERA must be immediately taken out of operation and secured
against unauthorized use.
Only service technicians from Balluff GmbH may repair defective devices. Intervention in the product by the operator is
not permitted due to safety reasons. The SMARTCAMERA's housing may not be opened or loosened!
WARNING
Before maintenance, disconnect the device from the power supply.
NOTE
In the interests of product improvement, Balluff GmbH reserves the right to change the tech-
nical data of the product and the content of this manual at any time without notice.
2.3

Disposal

Observe the national regulations for disposal.
10