Safety Precautions - Kodak STEP Kurzanleitung

Safety Precautions

• Do not attempt to disassemble this device for any reason.
• Never leave your printer or the ZINK® paper in an area that
might become extremely hot or where it will be exposed
to direct sunlight for a long time. This can cause your printer
to overheat or suffer other problems.
• Don't get it wet! If you need to clean your printer, use a soft
cloth that's been slightly dampened with water or rubbing
alcohol, and gently wipe away any dirty spots. Don't
submerge the whole thing in water, ever.
• Be careful with your printer. Try not to drop it, or shake it
violently. The inside of the printer has a lot of very small
parts that could break if they are jostled around too much.
• Do not use products such as alcohol, gasoline, diluent, or
any other organic solvent when cleaning or attempting to
clean this product.
• Do not use this device in an environment where it will be
exposed to heavy dust or humidity/moisture.
• Do not use this printer while bathing or in a shower.
• Do not place or charge the printer where it can fall or be
pulled into a tub or sink.
• Do not place, drop, or submerge the printer in water or any
other liquid.
• If the printer somehow falls into water despite you taking all
of the above precautions, please do not reach into the
water to retrieve it, especially if it is charging. If it is charging,
unplug it immediately and then retrieve it.
• Take care that objects do not fall and liquids are not spilled
onto the printer.
• This printer absolutely will not work without downloading
the Android or iOS application. If you do not have an
Android phone or an iPhone, unfortunately, this printer will
not work for you.