Cleaning And Descaling - Philips AVENT SCF355 Bedienungsanleitung

Cleaning and descaling

Cleaning
1 After each use, unplug the bottle warmer and let it cool down
(Fig. 12).
2 Remove the water from the bottle warmer for hygienic reasons
(Fig. 13).
3 Wipe the outside and inside of the bottle warmer with a moist cloth
(Fig. 14).
Do not use abrasive, anti-bacterial cleaning agents, chemical solvents or
sharp tools to clean the bottle warmer.
Note: If you used the bottle warmer to warm containers with baby food, make
sure that no spilled baby food remains on the bottom of the bottle warmer.
Descaling
It is recommended to descale the bottle warmer every four weeks
to ensure it continues to work eficiently.
1 Mix 50ml/1.7oz of white vinegar with 100ml/3.4oz of cold water to
descale the bottle warmer. Switch on the bottle warmer, select the
milk warming setting for contents under 180ml/6oz and let the
appliance operate for 10 minutes. Leave the solution in the bottle
warmer until all scale has dissolved (Fig. 15).
Note: You can also use citric acid based descalers.
Note: Do not use other types of descalers.
2 Unplug the bottle warmer before you empty it (Fig. 12).
3 Empty the bottle warmer and rinse its inside thoroughly. If you still
see traces of scale after rinsing, repeat the descaling procedure
(Fig. 13).
ENGLISH
13