Bauhaus 27615616 Originalbetriebsanleitung Seite 45

Error/Faults
The inflation equipment is
taking too long to inflate the
object.
The inflation equipment
hose is hot.
The jack motor is running,
but the jack is not working.
The jack needs a lot of time
to lift the load.
27615616
Cause
The hose of the inflation
equipment or the inflatable
object has a hole through
which air can escape.
The tyre is completely empty
and has become separated
from the rim, meaning that
air can escape.
The vehicle battery voltage
is too low.
The inflation equipment has
been running for too long
and has overheated.
The inflation equipment
hose is damaged or leaking.
The hose connection is not
properly connected to the air
inlet of the inflatable object.
The inflation equipment has
been running for too long
and has overheated.
The vehicle is too heavy.
The jack is leaking hydraulic
liquid inside.
The jack has not been used
for a long time and must be
moved up and down a few
times.
The safety valve screw is
loose.
The Up/Down switch of the
jack is set to the wrong posi-
tion.
The vehicle battery voltage
is too low.
The jack has been running
for too long and has over-
heated.
The jack is leaking hydraulic
liquid inside.
English
Remedy
Repair the hose or the ob-
ject.
Lift the vehicle to relieve the
tyre of the pressure from the
vehicle.
Charge/replace the battery.
Take a break for 15-20 min-
utes.
Repair the hose.
Fasten the nozzle to the in-
flatable object.
Take a break for 15-20 min-
utes.
Reduce the load and move
the jack to another lifting
point on the vehicle.
The jack is defective. Call
customer services.
Set the Up/Down switch to
'Up' and then to 'Down' sev-
eral times.
Tighten the safety valve
screw.
Set the switch to the correct
position.
Charge/replace the battery.
Take a break for 15-20 min-
utes.
The jack is defective. Con-
tact customer services.
GB
45