Personal Protective Equipment; Your Device At A Glance; 2-In-1 Device; Scope Of Delivery - Bauhaus 27615616 Originalbetriebsanleitung

GB
English
The vibration value stated in the technical
data represents the primary use of the
device. The actual vibration which occurs
during use may deviate from this due to the
following factors:
• Improper use;
• Unsuitable insertion tools;
• Unsuitable material;
• Insufficient maintenance.
You can significantly reduce the risk if you
comply with the following information:
– Maintain the device in accordance with
the maintenance instructions in the
user instructions.
– Avoid working at low temperatures.
– Keep your body warm in cold weather,
especially your hands.
– Take regular breaks and move your
hands to stimulate the circulation.

Personal protective equipment

Wear protective shoes while work-
ing with the device.
Wear safety goggles while working
with the device.
Wear hearing protection while
working with the device.
Do not wear protective gloves
while working with the device.
Wear close-fitting clothing while
working with the device.
Cover long hair, or wear a hairnet
if necessary.

Your device at a glance

2-in-1 device

p. 3, fig. 1
1. Switch
2. Tool compartment
3. Manometer
4. Safety valve
5. Disc
40
6. Adjustment threads
p. 3, fig. 2
7. Lifting cylinder
8. Handle
9. Base plate
10. Rubber pad
11. Cable compartment

Scope of delivery

• 2-in-1 device (jack/compressor)
• Electric impact wrench
• 12V= power cable (on-board power
cable)
• Wheel nut adapter with sizes 17-19 and
21-23 mm (2×)
• Battery terminal connection cable
• Air inflation adapter (3×)
• Fuse (3×)
• Allen wrench

Operation

NOTICE! Risk of damage to the
device! If the device is operated
for too long, it will heat up and
become damaged. If the external
parts of the device feel hot, switch
it off and leave it to cool for at least
30 minutes.
CAUTION! Explosion risk! Never
exceed the maximum permitted fill-
ing pressure of tyres or objects that
need pumping. Over-pumping may
cause these to burst and lead to
injuries.
Note: A 12-volt charger can be
used for the battery during opera-
tion as long as it has a charging
current of at least 10 A. Weaker
chargers may be damaged during
operation of the compressor. You
must carefully follow the safety
information for the charger.
27615616