About Characters Shown In The Display; Pty-Search Function - Samsung HT-E5200 Bedienungsanleitung

To show the RDS signals
You can see the RDS signals the station sends on
the display.
Press the RDS DISPLAY button while listening to
an FM station.
• Each time you press the button, the display
change to show you the following information :
PS NAME RT
While searching, <PS NAME> appears
PS
and then the station names will be
(Program
displayed. <NO PS> appears if no
Service)
signal is sent.
While searching, <RT> appears and
RT
then text messages the station sends
(RadioText) will be displayed. <NO RT> appears if
no signal is sent.
Frequency Station frequency (non-RDS service)

About characters shown in the display

When the display shows PS,or RT signals,the
following characters are used.
• The display window cannot differentiate upper
case and lower case letters and always uses
upper case letters.
• The display window cannot show accented
letters, <A,> for instance, may stands for
accented <A's> like <À, Â, Ä, Á, Å and Ã.>
PTY (Program Type) indication and

PTY-SEARCH function

One of the advantages of the RDS service is that
you can locate a particular kind of program from
the preset channels by specifying the PTY codes.
HT-E5200_XU_0223.indd 49 HT-E5200_XU_0223.indd 49
CT Frequency
To search for a program using the PTY
codes
K
Before you start!
• The PTY Search is only applicable to preset
stations.
• To stop searching any time during the process,
press 5 button while searching.
• There is a time limit in doing the following steps.
If the setting is cancelled before you finish, start
from step 1 again.
• When pressing the buttons on the primary
remote control, make sure that you have
selected the FM station using the primary
Usin
remote control.
RDS DISPLAY
1 2 2
PTY- PTY SEARCH
4 5
1 . Press the PTY SEARCH button while
listening to an FM station.
2 . Press the PTY- or PTY+ button until the PTY
code you want appears on the display.
• The display gives you the PTY codes
described to the right.
3 . Press the PTY SEARCH button again, while
the PTY code selected in the previous step is
still on the display.
• The centre unit searches 15 preset FM
stations, stops when it finds the one you
have selected, and tunes in that station.
TA
3
PTY+
6
49
|
English
2012-02-23 오후 2:31:32 2012-02-23 오후 2:31:32