Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Product Use/Host Charging
1、Place the Charging Base&Connect
the Power Supply.
Place the charging station against the wall
and on a flat ground. Do not place articles
within the range of 0.5m left and right and
1.5m ahead.
3、 Charge the robot: Put the robot on charging base to charge,
or use power adaptor to direct charge.
When charging, the indication light flashes(yellow light)；
When charging complete，the indication light turn to green once charging complete
During Cleaning , the robot can sense that its power is insufficient and automatically start
the recharging mode to find the charging base to recharge.。
You can also command the robot to start the recharging mode by recharging botton
on the remote controller/APP .
Charging Attention：
1、The charging station cannot be used in environments with strong reflection such as
direct sunlight or nearby mirrors.
2、 In order to ensure the normal working hours, please fully charge the robot before use.
The charging time is about 6 hours.
3、When charging, please remove the water tank assembly from the robot vacuum,
so as to ensure the safety of charging and prevent wet mops from damaging the floor.
4、When Charging, All buttons except start button on the host/remote/APP will make the
robot abnormal.
2、Turn on the Main Switch Power.
" I "means turn on robot，
"O" means turn off robot.
5
Indicator light
Werbung
Inhaltsverzeichnis
