wallas 88DU Montage-, Bedienungs- Und Wartungsanleitung Seite 71

Installation
Installation of the fl ue gas pipe
Measure the length of the fl ue gas and exhaust pipe from the device to the gas
lead-through. Remember to add the required length for the swan neck section.
Cut the fl ue gas pipe 30–50 mm longer than the exhaust pipe. This way the pipe
will stay in place in the gas lead-through more fi rmly.
Connect the fl ue gas pipe (ø 28 mm) to the device using the
hose binder (9) in the accessory bag.
13
15
Attach the connection box of the exhaust pipe (13)
to the cooling case of the stove with a screw (15).
88DU
9
- 71 -
GB
14
Connect the exhaust (ø 45 mm)
to the connection box with a hose
binder (14).
490070GB