wallas 88DU Montage-, Bedienungs- Und Wartungsanleitung Seite 69

Installation
Installing in demanding conditions
If the device is installed or will be used in demanding conditions, e.g.
the fl ue gas hose is 2 to 4 metres long,
the stove is surrounded by thick thermal insulation,
there is another heat source under the stove (e.g. a Wallas oven 86D or a refrig-
erator),
the climate is particularly warm,
the intake connection set 3430 must be installed on the stove.
Install the set in front of the blower in the stove's cooling case.
Lead the ø 75 mm hose (max length 1 m) to a location with fresh air. Ensure that
the air fl ows freely into the hose. Do not crimp the hose.
88DU
- 69 -
GB
490070GB