wallas 88DU Montage-, Bedienungs- Und Wartungsanleitung Seite 68

You can also fabricate a
detachable panel to go in
front of the stove. This will
facilitate installation and
maintenance.
Ensure that there is suf-
fi cient space under the
stove for cables and hoses.
The control panel should
be installed on a vertical
surface.
442 mm (17
Measurements of the stove
installation cut-out
Installation
Stove installation
Saw a cut-out (see picture) for the stove and the control panel in your chosen loca-
tion.
The length of the control panel cable is 2 m.
Ensure that there is suffi cient space
between the stove and the vertical
surface to facilitate installing and
detaching the device.
/ ")
13
32
88DU
85 mm (3
7 mm ( / ") 71 mm (2
9
32
35 mm (1 / ")
3
8
Measurements of the control panel installation cut-out
If necessary, predrill holes for the ø 2 mm (
- 68 -
GB
The stove requires a replacement
air opening of at least 100 cm
Ensure that the air circulation under
the stove is suffi cient
The control panel
can also be installed
in a vertical position.
/ ")
11
32
/ ") 7 mm ( /
25 9
32 32
17,5 mm (
/ ") screws.
3
32
490070GB
2 .
")
/ ")
11
16