LD Systems DDQ Serie Bedienungsanleitung Seite 12

HORN CONFIGURATION:
FRONT OF HOUSE CONFIGURATION
For the front of house application, the narrower side of the HF horn opening must face downward.
STAGE MONITOR CONFIGURATION
For use as a stage monitor, the LDDDQ10 and LDDDQ12 can be position lying on their sides (horizontal setup). If
necessary, the HF horn can be rotated by 90° in order to attain a greater
HF dispersion angle. To do this, the active speaker must first be switched off and disconnected from the mains.
Next remove the front grille and loosen and remove the screws on the mounting flange of the horn . Afterwards
the horn can be rotated by 90° and re-fastened (please never rotate more than 90°). If the HF horn is to rotated
back for a vertical setup, this must always be done in the opposite direction. Rotating the HF horn multiple times
in the same direction can damage the leads to the HF system or its terminals.
12