Panasonic CF-VDR732U Bedienungsanleitung Seite 12

WinDVD
NOTE
Do not enter the standby or hibernation mode, or switch the display by pressing
Fn + F3 while WinDVD is running.
Do not start WinDVD while the hard disk drive indicator is blinking immediately
after the computer was started up.
During video playback, do not perform the following.
• Ejecting the disc
• Using other applications or the Command Prompt
• Changing the settings of the screen properties
If you maximize the video display window, you can return to the original window
E
size by double-clicking over the images.
When the number of display colors is increased, a message appears and the DVD
cannot be played:
• Reduce the number of display colors.
•
Windows XP
Right-click on the desktop, select [Properties] - [Settings] - [Advanced] - [Trouble-
shoot] and maximize the value of Hardware acceleration.
Windows 2000
Right-click on the desktop, select [Properties] - [Settings] - [Advanced] - [Trouble-
shooting] and maximize the value of Hardware acceleration.
Immediately after resuming from a pause, frame dropping may occur depending on
the operating environment or DVD-video (images or sounds are disrupted).
In the Extended Desktop or simultaneous (internal/external) display mode, there are
times when images or video are not displayed correctly.
During a prolonged period of rapid advance, the pause mode may be established at
some point. If this happens, exit WinDVD, and restart.
Before using the capture function in WinDVD, first remove the checkmark from
[Use Hardware Decode Acceleration].
(To display the [Use Hardware Decode Acceleration] setting screen, right-click on
the WinDVD screen, and select [Setup] - [Video].)
12