novaer INUK 3.5 CH01 Bedienungsanleitung Seite 37

(4) FAN SPEED ADJUSTMENT BUTTON
Drücken Sie bei eingeschaltetem Gerät diese Taste, um die Gebläsegeschwindigkeit im Kühlmodus von (AUTO) auf niedrig
(Low), mittel (Med) oder hoch (High) einzustellen.
The fan speed cannot be set in DRY mode. It is preset at the low level.
(5) WIFI KEY - both on the remote control and on the device display
Press this ON / OFF button to switch the WLAN function on or off. When the WLAN is switched on, the LED lights up. To
reset the WiFi settings, press and hold this button for 10 seconds.
(6) TASTE SWING
Press this button to activate the automatic vibration of the slats (air distribution).
TASTE SWING
Drücken Sie diese Taste, um die automatische Schwingung der Lamellen zu aktivieren (Luftverteilung).
X-FAN BUTTON (only on the remote control)
By pressing the X-FAN button in cooling or dehumidifying mode. The function causes the
Switching off the device the fan continues to run for about 2 minutes to dry the evaporator completely.
SLEEP BUTTON (only on the remote control)
Press this button to activate the sleep function. This adjusts the entered temperature when the body and room tempe-
rature change during the night, so that maximum comfort is guaranteed when sleeping and consumption is reduced to a
minimum.
In cooling mode, the temperature rises by 1 ° C per hour, then by 2 ° C in two hours, in order to keep this value.
The sleep function is not available in ventilation, dehumidification and auto mode. When the SLEEP function is activated,
the indicator lamp lights up.
TIMER BUTTON (on the remote control and on the device)
Press this button to activate the timer.
1) Timer-on (automatic switch-on)
If the device is switched off, you can enter the period after which the device should switch on again.
Remote control: Press the TIMER button. The symbols T-ON and H light up. Now press the + and - buttons within 5
seconds to set the operating time. Select a number of hours between „0.5" and „24". Press the TIMER button again to
confirm the setting. The T-ON symbol remains on and indicates that the TIMER is running.
Mobile Air Conditioner: Press the TIMER button. The symbols T-ON and H light up. Now press the + and - buttons
within 5 seconds to set the operating time. Select a number of hours between „0.5" and „24". Press the TIMER button
again to confirm the setting. The T-ON symbol remains on and indicates that the TIMER is running.
2) Timer-off (automatic switch-off)
If the device is switched on in COOL mode, you can enter the period after which the device should switch off again.
Remote control: Press the TIMER button. The symbols T-OFF and H light up. Now press the + and - buttons within 5
seconds to set the operating time. Choose a number of hours between
„0.5" and „24" off. Press the TIMER button again to confirm the setting. The T-OFF symbol remains on and indicates
that the TIMER has been set to switch off.
Mobile air conditoner: Press the TIMER button. Select a number of hours between „0.5" and „24". Press the TIMER
button to confirm the setting.
Deleting the timer: If a TIMER has been entered, press TIMER to display the entered timer. Press TIMER again to delete
the entered TIMER.
V 20/03
COOL DRY
AUTO
FAN HEAT
EN
37