novaer INUK 2.6 C01 Bedienungsanleitung Seite 33

(4) FAN SPEED ADJUSTMENT BUTTON (FAN SPEED)
With the unit on, press this button to set the fan speed in cooling mode (AUTO)
to low (low), medium (med) or high (high).
The fan speed cannot be set in DRY mode. It is preset at the low level.
(5) SLEEP BUTTON (both on the remote control and on the device)
Press this button to activate the Sleep function, which automatically changes the entered temperature as the body and
room temperature change over the course of the night, ensuring maximum comfort while sleeping and reducing consump-
tion to a minimum. In cooling mode, the temperature rises by 1 °C in the first two hours, and this value is then maintained.
The sleep function is not available in ventilation, dehumidification and auto mode. When the SLEEP function is set, the
indicator lamp lights up.
(6) TIMER BUTTON (on remote control or directly on the device)
Press this button to activate the timer.
1) Timer-on (automatic switch-on)
When the device is switched off, you can determine the time after which the device should switch on again.
Remote control: Press the TIMER button. The symbols T-ON and H light up. Press the + and - buttons within 5 seconds
to set the operating time. Select a number of hours between „0.5" and „24". Press the TIMER button to confirm the
setting. The T-ON symbol remains visible and indicates that the TIMER has been set. Device: Press the TIMER button.
Select a number of hours between „0.5" and „24". Press the TIMER button to confirm the setting.
2) Timer-off (automatisches Ausschalten)
If the device is switched on in COOL mode, you can set the period after which the device should switch off. Remote
control: Press the TIMER button. The symbols T-OFF and H light up. Press the + and - buttons within 5 seconds to set
the operating time. Select a number of hours between „0.5" and „24". Press the TIMER button to confirm the setting.
The T-OFF symbol remains visible and indicates that the TIMER has been set to switch off. Device: Press the TIMER
button. Select a number of hours between „0.5" and „24". Press the TIMER button to confirm the setting.
Deleting the timer: If a TIMER has been entered, press TIMER to display the entered timer. Press TIMER again to
delete the entered TIMER.
COOL DRY
AUTO
FAN
EN
33