Husqvarna LM 2146 CD Betriebsanweisung Seite 6

DESCRIPTION
1 Upper handles
2 Fuel-enrichment pump
3 Fastening knobs for upper handles
4 Grass catcher
5 Oil filler cap
6 Oil drain plug
7 Deck
8 Adjusting levers for cutting height
9 Spark plug
10 Fuel cap
11 Engine start-grip
ASSEMBLY OF GRASS CATCHER
ASSEMBLY DEFLECTOR
ASSEMBLY HANDLES
ASSEMBLY HANDLES
ADJUSTMENT OF HANDLES
MULCHING CAP INSERTION
To cut the grass with the mulching system (no grass collection), lift the rear deflector panel and insert the cap
by fixing it with the spring as shown in the figure.
ADJUSTMENT OF CUTTING HEIGHT
SAFETY PRECAUTIONS
 Always operate with the deflector or grasscatcher in the correct position.
 Always stop the engine before removing the grasscatcher or adjusting the height of cut.
 Never place your hands or feet underneath the deck or into the grass discharge chute while
the engine is running.
Before mowing, remove all foreign objects from the lawn
which may be thrown by the machine. While mowing,
stay alert for any foreign objects which may have been
missed.
ENGLISH - 3
12
13
14
15
16
17
18
(if not already assembly)
(lower)
(upper)
(for the models where it is included only)
Never lift the rear of the mower while starting the engine
or during normal operation.
Never place your hands or feet underneath the deck or into
the rear discharge chute while the engine is running.
Rear deflector
Throttle lever
Engine stop lever
Reduction gear
Ignition key
Handle advance speed
Clutch lever