installation & connection
GETTING STARTED
If you press [q], both power indicator and status indicator around the [q] button will turn on in blue.
Start Screen
Display the current settings of the digital presenter
Display the current settings of capture
Display the status of SD(HC) card and the system operation status
- SD(HC) CARD DETECTED : SD(HC) card is inserted.
- SD(HC) CARD DOES NOT EXIST : SD(HC) card is not inserted.
- CAMERA SYSTEM INITIALIZING : Initializing the system.
- SYSTEM FIRMWARE FILE EXISTS : The SD(HC) card contains the system update file.
- PLEASE WAIT FOR UPDATE PROCESS : Updating the system firmware.
- UPDATE PROCESS DONE! : System update is completed.
J
Do not unplug the power cable or remove the SD(HC) card during the update process.
Otherwise, it may cause a product failure.
16_
installation & connection