setup & application
❖ Mask Setting
You can mask a portion or the whole of the screen so that it is hidden.
1. From the menu, select IMAGE ADJUSTMENT MASK SETTING.
2. Select MASK SETTING to display the sub menu items.
• TONE : Select a tone level.
Each time you press [+], the tone value will switch to <LEVEL 1-2-3-4>. The lower the level is, the
greater the transparency of the masking area becomes.
• TYPE : Select a mask orientation.
Each time you press [+], the mask orientation will switch to <VERTICAL - HORIZONTAL>.
• SIZE : Select a mask size.
Each time you press [+], the mask size will switch to <FULL - 3-QUARTERS - HALF - QUARTER>.
M
When the mask setting is completed, press the [d] button on the remote control to activate it. Use the left/
right buttons to move the masking area.
Zoom In/Out
You can zoom in/out an object on the screen.
Use [©] or [¨] on the control panel or the remote control to adjust the view.
(Optical zoom x6, digital zoom x8)
• If you press [©] or [¨], the sky blue area indicates an optical zooming area while the red area
indicates a digital zooming area.
• The maximum optical zooming factor is x6. No further zooming will be allowed even if you press and
hold [©].
To switch to digital zoom, press [©] again.
To switch from digital zoom to optical zoom, press [¨] again, too.
• The digital zooming may deteriorate the quality of video.
28_
setup & application
MASK SETTING
TONE
LEVEL 4
TYPE
HORIZONTAL
SIZE
FULL
RETURN }