Saving Image In Memory - Samsung SDP-900DXA Benutzerhandbuch

Adjusting your image
Image rotate control
For image rotation, press ROTATE button.
To rotate the image by 90˚, 180˚, 270˚, 0˚, press ROTATE button.
NTSC/PAL switching
Switches Video output mode to NTSC or PAL.

Saving image in memory

You can save the image up to 8 frames into your digital presenter's memory. After saving, you will be able to
recall it.
• If you turn the power off, all the saved images will be lost.
• The image is not saved in the Rotate or Freeze status.
• Digital zoom picture is not saved, therefore when you press SAVE button under
digital zoom mode, the digital presenter automatically returns to the maximum optical
zoom state.
All manuals and user guides at all-guides.com
The memory location numbers are printed on the right
side of these buttons. For example, if you want to
save the image into memory location 7, press SAVE
then press AF button printed 7 at right side.
The rotate image status
will be displayed.
To save the image into the memory, press SAVE
button and specify the memory location within 4
seconds using the number keys from 1 through 8.
If you want to recall the saved image from
memory, press RECALL button and press the
memory location number within 4 seconds. If you
press and hold down RECALL button, all images
saved in memory are displayed one by one.
If you want to exit from the recall mode, press
EXIT button.
R O
T A
T E
9 0
˚
25
Page