As shown in the figure, push the wheel buckle, pull down the wheel components, and
remove them. Then reinstall the limit pile into chassis to realize the different running
paths
Three settings for wheels are recommended
Setting 1
Default, setting: B-C, for most of pools
Wheel
angle
Running
path
Setting 2
C-A, when the turning angle is too large
Wheel
angle
MV-1940-9-2019 . swim-fun.com © Alle rettigheder forbeholdes Swim & Fun Scandinavia ApS
MV-1940-9-2019-Pool-Robot-Frisbee-BOG.indb 65
UK
65
18/09/2019 10.57