Sicherheitshinweise / Safety instructions 3. Sicherheitshinweise GEFAHR! Gefahren für Kinder Sorgen Sie dafür, dass Kunststoffhüllen, Verpackungen, etc. ordnungsgemäß entsorgt werden und sich nicht in der Reichweite von Babys und Kleinkindern befinden. Erstickungsgefahr! Achten Sie darauf, dass Kinder keine Kleinteile vom Produkt lösen. Sie könnten die Teile verschlucken und daran ersticken.
Lieferumfang / Scope of delivery 4. Lieferumfang 4. Scope of delivery 2 x side board A+B 2 x Seitenteile A+B 1 x upper rear board C 1 x Rückwand oben C 1 x lower rear board F 2 x Rückwand unten F 1 x table top D 1 x Tischplatte D 1 x front board E...
Montage / installation 5. Montage / Installation Aufbau mit 2 Person / Assembly with 2 people Legen Sie zur Montage alle Komponenten auf einer geeigneten Montagefläche ab. Benutzen Sie eine weiche Unterlage, um Beschädigungen an den Oberflächen zu vermeiden. For assembly, place all components on a suitable assembly surface. Use a soft pad in order to avoid damage to the surfaces.
Montage / installation Tischplatte D - 14 Verbindergehäuse I + 5 Verbindungsbolzen J + 12 Dübel H eindrücken / Push 14 connector housing I + 5 connecting bolt J + 12 dowel H into the table top D. Frontblende E - 9 Verbindergehäuse I + 6 Dübel H eindrücken Push 9 connector housing I + 6 dowel H into the front board E.
Seite 8
Montage / installation Legen Sie die Tischplatte D auf eine weiche Unterlage und stecken die Frontblende E auf. Drehen Sie alle Verbindergehäuse I fest / place the table top on a soft assembly surface . Insert E onto D and tighten all connector housing I Legen Sie die Rückwand oben C auf eine weiche Unterlage und stecken E+D auf.
Seite 9
Montage / installation Legen Sie das Seitenteil A auf eine weiche Unterlage und stecken C+D+E auf A. Drehen Sie alle Verbinder- gehäuse I fest / place the side board A on a soft assembly surface . Insert C+D+E on A and tighten all connector housing I Stecken Sie die Rückwand unten F auf A.
Seite 10
Montage / installation 5.10 Drücken Sie das Seitenteil B auf die montierten Teile und drehen Sie die Verbindergehäuse I fest / Insert side board B onto assembled components and tighten all connector housing I 5.11 Kabeldurchlass G in das Loch der Tischplatte D drücken / insert the cable passage G into the hole on the table top D...
Seite 11
Studio DJ Table 1500 weiß / white Art.: 503688 Art.: 503689 Studio DJ Table 1500 graphitschwarz / graphite black Thon Studio DJ Table 1500...