Makita HR001G Betriebsanleitung Seite 12
Akku-kombi-bohrhammer
Vorschau ausblenden
Andere Handbücher für HR001G:
- Betriebsanleitung (180 Seiten) ,
- Betriebsanleitung (180 Seiten) ,
- Betriebsanleitung (180 Seiten)
Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Model HR002G with DX14
Sound pressure level (L
Sound power level (L
) : 104 dB (A)
WA
Uncertainty (K) : 3 dB(A)
Model HR003G with DX12
Sound pressure level (L
Sound power level (L
) : 104 dB (A)
WA
Uncertainty (K) : 3 dB(A)
Model HR004G with DX14
Sound pressure level (L
Sound power level (L
) : 104 dB (A)
WA
Uncertainty (K) : 3 dB(A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Vibration
The following table shows the vibration total value
(tri-axial vector sum) determined according to applica-
ble standard.
Model HR001G
Work mode
Vibration
emission
2
Hammer
7.0 m/s
drilling into
concrete
(a
)
h, HD
2
Hammer
7.0 m/s
drilling into
concrete with
DX12 (a
)
h, HD
2
Chiselling func-
6.5 m/s
tion with side
grip (a
)
h, Cheq
2
Drilling into
2.5 m/s
or
metal (a
)
less
h, D
) : 93 dB(A)
pA
) : 93 dB(A)
pA
) : 93 dB(A)
pA
Uncertainty (K) Applicable
standard
2
1.5 m/s
EN60745-2-6
2
1.5 m/s
EN60745-2-6
2
1.5 m/s
EN60745-2-6
2
1.5 m/s
EN60745-2-1
Model HR002G
Work mode
Vibration
emission
Hammer
6.5 m/s
drilling into
concrete
(a
)
h, HD
Hammer
6.0 m/s
drilling into
concrete with
DX14 (a
)
h, HD
Chiselling func-
7.5 m/s
tion with side
grip (a
)
h, Cheq
Drilling into
2.5 m/s
metal (a
)
h, D
Model HR003G
Work mode
Vibration
emission
Hammer
7.0 m/s
drilling into
concrete
(a
)
h, HD
Hammer
7.0 m/s
drilling into
concrete with
DX12 (a
)
h, HD
Chiselling func-
7.0 m/s
tion with side
grip (a
)
h, Cheq
Drilling into
2.5 m/s
metal (a
)
less
h, D
Model HR004G
Work mode
Vibration
emission
Hammer
6.5 m/s
drilling into
concrete
(a
)
h, HD
Hammer
6.0 m/s
drilling into
concrete with
DX14 (a
)
h, HD
Chiselling func-
7.5 m/s
tion with side
grip (a
)
h, Cheq
Drilling into
2.5 m/s
metal (a
)
h, D
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
12 ENGLISH
Uncertainty (K) Applicable
standard
2
2
1.5 m/s
EN60745-2-6
2
2
1.5 m/s
EN60745-2-6
2
2
1.5 m/s
EN60745-2-6
2
2
1.5 m/s
EN60745-2-1
Uncertainty (K) Applicable
standard
2
2
1.5 m/s
EN60745-2-6
2
2
1.5 m/s
EN60745-2-6
2
2
1.5 m/s
EN60745-2-6
2
2
or
1.5 m/s
EN60745-2-1
Uncertainty (K) Applicable
standard
2
2
1.5 m/s
EN60745-2-6
2
2
1.5 m/s
EN60745-2-6
2
2
1.5 m/s
EN60745-2-6
2
2
1.5 m/s
EN60745-2-1
Werbung
Inhaltsverzeichnis
