1
Security instructions
Please read the safety instructions, provided in a separate manual, carefully.
Make sure that the environmental, mounting, and installation prerequisites
are met. This manual should be kept at a safe place and in reach of the
device.
1.1
Symbols
The exclamation mark warns about possible damage of the
!
device itself or connected devices.
i
The information symbol gives general hints and informs
about handling and procedures for use of the device.
1.2
Instructions
Connect cables and data only when the device is powered
!
down.
Before dismounting, appropriate measures must be taken to
!
protect the respective components against damage caused
by electrostatic discharge (ESD protection).
The device must be supplied by a separate certified SELV
!
Class 2 power supply.
The maximum length of each connected cable is 30 m.
!
i
If security instructions are missing, please contact the
OSRAM support service to receive a new copy.
Security instructions
07