Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation
3.6
Support
In case of technical problems or questions regarding installation and repair
please contact:
OSRAM GmbH
Customer Service
Karl-Schurz-Str. 38
33100 Paderborn, Germany
+49 5251 54648-0
support@ecue.com
4
Installation
The installation of the SYMPL Switch consists of mounting the device,
connections to e:net and to power supply.
The sequence of cabling is not defined. Supply the SYMPL Switch with
power after all cabling is completed; it starts booting.
Connect cables and data only when the device is powered
!
down.
Each cable should not exceed a length of 30 m.
!
4.1
Installation conditions
Installation position
Horizontal spacing
Minimum vertical rail grid spacing
Recommended vertical rail grid spacing
Installation location
12
Terminals on top and bottom
No spacing necessary
115 mm (90 + 25 mm)
(excluding conduit)
160 mm (with 40 mm conduit)
Indoor
Werbung
Inhaltsverzeichnis
