Herunterladen Inhalt Inhalt Diese Seite drucken

User Interface: Leds; General Remarks; Transport; Unpacking - OSRAM e:cue SYMPL Installationsanleitung

Vorschau ausblenden Andere Handbücher für e:cue SYMPL:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

General remarks

2.3

User interface: LEDs

The SYMPL Switch has six LEDs on the front panel. The six LEDs show the
basic states of the SYMPL Switch.
LEDs
Power
Act/PoE
e:net
3
General remarks
3.1

Transport

Only transport the device in its original packaging. This protects the device
from damage.
3.2

Unpacking

Only unpack the SYMPL Switch at its installation location. To protect the
device against condensation water, unpack it and wait until all moisture
remaining in the device has evaporated. Condensation can occur when the
device is moved from a cold to a warm location. Keep the packaging for
use in case of further transport. Inspect all parts for completeness
regarding chapter "2.1 Delivery content" on page 08. If there is apparent
damage to the device or parts are missing from the delivery scope, please
contact the OSRAM support service.
10
Off: no power.
On: power supplied.
Off: no link available.
Green: link established; e:net link/ traffic.
Red: PoE supplied.
Orange: PoE supplied and e:net link/ traffic.
Off: no link available.
On: link established.
Blinking: e:net traffic.

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Am313830035

Inhaltsverzeichnis