BOMANN cb 997 Bedienungsanleitung Seite 42

6....-05-BS 1234 NEU
Floor nozzle:
GB
Damper:
Open the damper on the hose handle to adjust the airflow or to release objects clin-
ging to the nozzle.
Filter:
Your machine has three filter systems:
1. Transparent dust collection container
• The traditional dust bag system has been replaced by a transparent dust
collection container in which coarse dirt particles and tiny particles floating
in the air are swirled out of the suction air by the high speed of the air cur-
rent.
• The purchase of dust bags is no longer necessary.
2. Motor Protective Filter (in the Dust Container)
The filling level indicator (7) shows when the dust container has to be emptied.
You should then proceed as follows, making sure you adhere to the following
order of steps:
1. Fold the handle (5) upwards and pull the dust container out of the vacuum
cleaner together with the filter insert (6) (see illustration 1).
2. Remove the contents of the dust container. In order to do this, press the
button on the dust container (see illustration 2).
3. Every time the vacuum cleaner is emptied the filter screen on the floor of
the dust housing should be cleaned (see illustration 3).
4. Clean the motor protection filter (11) by tapping and gently brushing out
(see illustrations 4).
5. Reinsert the components.
42
12.11.2004 12:15 Uhr
For cleaning carpets or smooth surfaces.
In order to facilitate control, the floor nozzle is fitted
with rollers and can be adjusted to suit the circum-
stances.
Carpet: make sure that the brushes on the floor nozzle
are deactivated when cleaning carpets. If this is not the
case, press the lever on the floor nozzle forwards with
your foot. In order to vacuum even surfaces, for exam-
ple, press the lever back with your foot. This activates
the brushes (you can tell whether this is the case by
checking that the brushes are visible on the floor nozz-
le).
Seite 42