BOMANN cb 993 Bedienungsanleitung Seite 36

5....-05-BS 1231
Upholstery/Brush Combination Nozzle:
GB
Please note that the upholstery/brush nozzle is a "2 in 1" attachment. For uphol-
stery please use the nozzle without the attachment. The brush attachment is hoo-
ked under the upholstery novel.
Releasing the accessories:
Pull them apart while turning slightly.
Vacuum power regulator (3):
Low vacuum power:
Medium vacuum power:
High vacuum power:
Telescopic Suction Tube (13):
As the length of the suction tube can be adjusted it can be adapted to your own
personal height. Unlock the coupling by pressing the button (14) downwards. Then
move the telescopic suction tube to the desired height. To fix the suction tube in
position, pull it until it is heard to lock in place.
Cable winding device:
Pull out the cable (1) up to the maximum length indicated with the yellow mark.
Never pull the cable out up to the red mark as the cable winding can be damaged.
Said damages are not covered by the warranty.
Winding:
Press the cable (5) winding button and guide the cable. Hold the cable to avoid wrap-
ping.
Air Slide:
Open the air slide on the hose handle in order to regulate the airflow or to clear any
particles sticking to the nozzle.
Dust bag replacement display (8):
Hold the hose up into air. If the dust bag change display lights up, the bag is full.
Please change it.
Changing the dust bag:
Pull the plug out of the socket. Press the button (10) to open the lid of the dust bag
compartment (until its locks in place). Remove the dust bag holder and pull the dust
bag out of the holder. Insert a new dust bag. Reinsert the dust bag holder. Close
the cover so that it snaps into place.
36
04.03.2003 11:21 Uhr
For curtains and delicate fabrics
For long-pile velour carpets and textile flooring
For sturdy rugs and floors
Seite 36