Overview Of The Components; Using The Appliance - BOMANN bs 969 cb Bedienungsanleitung

GB
1 Cable (not shown)
2 On/off switch
3 Carrying handle
4 Cable-winding key
5 Vacuum power regulator
6 Dust bag fi lling display
7 Handle for opening the dust bag
compartment
8 Filter cover - Outlet fi lter
(not shown)
9 Hose connection
• Insert the connection head of the suction hose (10) into the hose connector
(9) until it locks in place. To do so, please press the buttons simultaneously. In
order to release the hose again, please press the buttons once more on the
connection head.
• Keep the buttons pressed down and then pull out the hose.
• Please insert the sections of the 2-part suction tube (11) into one another and
then attach them to the handle section.
• Then assemble the fl oor nozzle and/or the accessories.
1. Unwind the length of cable (1) you require.
2. Insert the mains plug into a correctly installed 230 V, 50 Hz power socket. Turn
on the device with the on/off switch (2) by pushing the regulator downwards.
3. Adjust the suction power by turning the suction power regulator (2).
4. Vacuum at a steady speed. There is no need to exert pressure.
5. Attention: pay attention to the range that can be covered with the cable length.
Vacuum power regulator
Low vacuum power:
Medium vacuum power:
High vacuum power:
Cable winding device
Pull out the cable (1) up to the maximum length indicated with the yellow mark.
Never pull the cable out up to the red mark as the cable winding can be damaged.
Said damages are not covered by the warranty.
40
6....-05-BS 1245 40

Overview of the Components

Start-up

Using the Appliance

For curtains and delicate fabrics
For long-pile velour carpets and textile fl ooring
For sturdy rugs and fl oors
10 Vacuum hose
11 Suction tube
12 Floor nozzle
13 Crevice nozzle
14 Brush nozzle
15 Jointed nozzle
16 Parking assistance
Hook on the fl oor nozzle
(not shown)
25.02.2005, 14:19:25 Uhr