Water-Resistant Component
Your new Horizon Hobby SR4000T/SR6000T Telemetry Receiver has a special
water-resistant coating on the electronics to ensure reliable performance in
higher than average moisture conditions. This conformal coating can offer mild
protection from light drops of water.
•
DO NOT submerge this product under water for any period of time. If it is
submerged, it may result in damage or loss of function.
•
DO NOT pour water onto or allow excess water to come in direct contact
with the product.
•
DO NOT operate this product in heavy rain or snow.
•
DO NOT expose this product to salt water (ocean water or water on salt-
covered roads), contaminated or polluted water.
In case of excess exposure to water or debris, immediately wipe down the
SR4000T/SR6000T with a soft cloth, and allow it to fully dry before next use.
NOTICE: Never use a pressure washer to clean your vehicle.
NOTICE: Make sure the other components in your vehicle are waterproof or
water-resistant before driving in wet conditions.
SR4000T/SR6000T Telemetry Receiver
The Spektrum™ SR4000T/SR6000T Telemetry Receiver is compatible with all
Spektrum DSMR
®
transmitter capable of telemetry.
Specifications
Type: DSMR with internal telemetry
Dimensions (LxWxH): 1.5 x 1.1 x 0.6 in (37.5 x 27.7 x 15.7mm)
Antenna Length: 8.27 in (210mm)
Channels: 4 (SR4000T): 6 (SR6000T)
Weight: 0.3 oz (9.2 g)
Band: 2.4GHz
Voltage Range: 3.5–9.6V
A: Voltage sensor port
B: Temperature sensor port
C: Bind Button
D: Antenna
E: RPM sensor port
F: XBUS Port
G: Servo ports-
Bind/Battery
•
Steering
•
Throttle
•
Aux1-Aux4
•
(SR4000T: Aux1, Aux2)
surface transmitters. Telemetry functions require a Spektrum
A
B
C
D
G
E
F
EN