Honda WB20XT Bedienungsanleitung Seite 7

To ensure safe operation –
• Always make a pre-operation inspection (page 9) before you start
the engine. You may prevent an accident or equipment damage.
• For safety, never pump flammable or corrosive liquids such as
gasoline or acid. Also, to avoid pump corrosion, never pump sea
water, chemical solutions, or caustic liquids such as used oil, wine,
or milk.
• Place the pump on a firm, level surface. If the pump is tilted or
overturned, fuel spillage may result.
• To prevent fire hazards and to provide adequate ventilation, keep
the pump at least 1 meter (3 feet) away from building walls and
other equipment during operation. Do not place flammable objects
close to the pump.
• Children and pets must be kept away from the area of operation
due to a possibility of burns from the hot engine components.
• Know how to stop the pump quickly, and understand the operation
of all controls. Never permit anyone to operate the pump without
proper instructions.
• Gasoline is extremely flammable and is explosive under certain
conditions.
– Refuel in a well-ventilated area with the engine stopped. Do not
smoke or allow flames or sparks in the refueling area or where
gasoline is stored.
– Do not overfill the tank (there should be no fuel above the upper
limit mark). After refueling, make sure the tank cap is closed
properly and securely.
• Be careful not to spill fuel when refueling. Spilled fuel or fuel vapor
may ignite. If any fuel is spilled, make sure the area is dry before
starting the engine.
• Never run the engine in an enclosed or confined area. Exhaust gas
contains poisonous carbon monoxide gas; exposure can cause loss
of consciousness and may lead to death.
• Before each use, look around and underneath the engine for signs
of oil or gasoline leaks.
4