CANGAROO BABYUNO Gebrauchsanweisung Seite 18

9.) Take out the bowl, turn off the device from the button and unplug the supply
cord as safety measure.
10.) Leave the appliance to cool down. Then pour out the remaining water and
wipe it dry.
 Note 1: Always test the food temperature before feeding so as not to hurt the
baby.
 Note 2: Wait for about a minute before taking out the bowl from the warmer,
to let it cool down and to avoid burning your hands.
C. Sterilizing small feeding accessories (high temperature ~ 100°C) (Fig. S1-2):
Note: Working under high temperature will lead to easier damaging of the unit. In
order to prolong its life, do not use this function too often!
1.) Fill the warmer with 30 ml water.
2.) Put small articles such as pacifiers or teats into the warmer.
3.) Plug the supply cord into an electrical power outlet and turn the knob into the
following setting:
4.) The LED indicator will flash in red.
5.) The sterilization will end after several minutes and the LED indicator will turn
off.
6.) Place the button in position OFF and unplug the supply cord to turn the device
off.
7.) Leave the appliance to cool down completely before taking out the sterilized
object.
8.) Pour out the remaining water from the appliance and wipe it dry.
GUIDELINES FOR MAINTANCE AND CLEANING OF THE BOTTLE WARMER
A. CLEANING:
1. Before cleaning the product, turn off the power switch, unplug the supply cord
from the power outlet and leave the appliance to cool down.
2. Take out the bowl and wipe inside and outside the product only with damp
cloth and soft cleanser.
3. Do not use strong detergents for cleaning the product – bleach, alcohol – based
ones and such with abrasive parts.
4. We recommend you to use pre-boiled or filtered water in order to reduce the
risk of lime scale deposition.
B. DESCALING:
1. You should descale the Electric and Baby Food Warmer every four weeks to
ensure that the unit will continue working 100% effectively.
2. OR: Mix one sachet of citric acid (10g) with 200 ml/7 oz water. Pour the solution
in the warmer. Plug the electric cable in the unit and in the power outlet
17