CANGAROO BABYUNO Gebrauchsanweisung Seite 17

5.) Plug the supply cord into an electrical power outlet and turn the knob into the
following setting:
6.) The LED indicating light with flash in red color.
7.) During the warming procedure, the LED indicator will flash, showing that the
water around the bottle reaches the temperature, needed to warm the content of
the bottle.
8.) When the LED indicator turns off, this means that the process has finished.
3.) The water should never flow over the bottle!
4.) Never fill more than 120 ml of water!
5.) Plug the supply cord into an electrical power outlet and turn the knob into the
following setting:
6.) The LED indicating light with flash in red color.
7.) During the warming procedure, the LED indicator will flash, showing that the
water around the bottle reaches the temperature, needed to warm the content of
the bottle.
8.) When the LED indicator turns off, this means that the process has finished.
9.) Turn the adjustment button to position OFF, to turn off the device. Take out
the bottle from the warmer and unplug the supply cord from the electric power
outlet.
10.) Leave the appliance to cool down for a few minutes. Pour out the water from
the remaining water and wipe it dry.
11.) Always before feeding Your child, shake the bottle carefully and check the
temperature of the milk by sprinkling a few drops onto your wrist.
12.) Wait for a minute before taking the bottle out of the warmer, so it can cool a
bit and to avoid the risk from burning.
B. For warming baby food (Fig. FW1-3):
1.) Put the baby food (such as cereal, congee or soup etc.) in the included in the
set bowl.
2.) Fill the warmer with 100ml of water.
3.) Never fill the unit with too much food in order it not to overflow.
4.) Place the bowl with food into the warmer.
5.) Plug the supply cord of the warmer in the electric power outlet and put the
knob in the following position:
6.) The LED indicating light with flash in red color.
7.) During the warming procedure, the LED indicator will flash, showing that the
water around the bowl has reached the temperature, needed to warm the
content of the bowl.
8.) When the LED indicator for heating turns off, this means that the desired
temperature is reached.
16