Setting Up A New System - TechniSat TechniRouter 9/1x8 G Montageanleitung

EN
Trunk lines e. g. on staircase
In the example shown, the practical compatibility of the system means it makes more
sense to use two switching matrices 9/2x4. The probability of interference between
participating neighbours is lower.

4.2 Setting up a New System

Advantage:
You do not need to construct a "star-shaped distribution", and none of the receivers
•
need "their own" cables connected to a multiswitch.
Since the cable is very sensitive, you should install it at the end of the construction
•
progress. Where possible, use conduits for this purpose during installation. If the
conduit has bends or need to bridge long stretches, you must feed in the cable before
the laying process. Ensure there are no kinks in the cable. Do not expose to excessive
tensile strain.
previos
Splitter
Significantly fewer cables are required.
new
A maximum of 8
subscribers per line
Splitter
We recommend at least two sockets per residence are planned.
32
UHF
UKW
VHF
8
K
G
TechniRouter
9/1x8G and K