Abicor Binzel ABICUT 25K Betriebsanleitung Seite 12

1 Designated Use
Arc initiation voltage and rated
voltage
Voltage rating
Type of cooling
Tab. 2 Technical Data
Standard nozzle 0.65 mm / up to 20 A
Standard nozzle 0.8 mm / up to 20 A
Long nozzle
Long nozzle
Tab. 3 Selection of plasma nozzle
Guide values for cutting capacity
Material thickness
Steel
Stainless steel
Aluminium
Tab. 4
Guide values for cutting capacity
Standard length (other lengths
available on request)
Structure
Connection power/air cable
Execution
Tab. 5 Cable assembly
EN - 4
ABICUT 25K
ABICUT 25K
0.9 mm long / up to 20 A 0.9 mm long / up to 40 A 1.0 mm long / up to 50 A
The specifications on the cutting capacity are guide values only, which are also
affected highly by the following! Type and quality of material; pressure and
impurities in compressed air; temperature of the work-piece to be cut; desired
quality of cut; condition of electrodes and cutting nozzle; distance and position
of cutting torch, relative to the work-piece; power source characteristics; cutting
speed.
ABICUT 25K
6 mm to 20 A
6 mm to 20 A
4 mm to 20 A
ABICUT 25K
4 m
Cable assembly
ABICUT 45
- -
500V peak value
air
ABICUT 45
0.65 mm / up to 25 A
0.8 mm / up to 40 A
ABICUT 45
10 mm to 40 A
10 mm to 40 A
6 mm to 40 A
ABICUT 45
6 m
Cable assembly
G1/4
Single connection or central connection
ABICUT 25K/45/75
ABICUT 75
- / 7 kV
ABICUT 75
1.0 mm / up to 55 A
1.2 mm / up to 75 A
1.2 mm long / up to 70 A
ABICUT 75
20 mm to 75 A
18 mm to 75 A
15 mm to 75 A
ABICUT 75
6 m
Cable assembly /
coaxial cable