Product Description And Specifications; Intended Use; Product Features - Bosch GRL 400 H Professional Originalbetriebsanleitung

18 | English
Only charge Bosch NiCd/NiMH re-
u
chargeable batteries with a capa-
city of 9 Ah or more (2 battery
cells). The battery voltage must
match the battery charging
voltage of the charger. Do not
charge any non-rechargeable bat-
teries. Otherwise there is a risk of
fire and explosion.
Do not expose the charger to rain or wet condi-
tions. Water entering a power tool will increase the risk of
electric shock.
Charge the measuring tool only with the supplied
u
charger.
Keep the charger clean. Dirt poses a risk of electric
u
shock.
Always check the charger, cable and plug before use.
u
Stop using the charger if you discover any damage. Do
not open the charger yourself, and have it repaired
only by a qualified specialist using only original re-
placement parts. Damaged chargers, cables and plugs
increase the risk of electric shock.
Do not operate the charger on an easily ignited sur-
u
face (e.g. paper, textiles, etc.) or in a flammable envir-
onment. There is a risk of fire due to the charger heating
up during operation.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended Use

Rotary laser
The measuring tool is intended for establishing and checking
exactly horizontal height profiles.
The measuring tool is suitable for indoor and outdoor use.
1 609 92A 5S3 | (09.09.2020)
Laser receiver
The laser receiver is intended to quickly find rotating laser
beams of the wavelength specified in the technical data.
The measuring tool is suitable for indoor and outdoor use.

Product Features

The numbering of the components shown refers to the rep-
resentation of the rotary laser, charger and laser receiver on
the graphic pages.
Rotational laser level/Battery charger
(1) Laser beam outlet aperture
(2) Variable laser beam
(3) Shock-warning function indicator
(4) On/off button
(5) Status indicator
(6) Battery pack
(7) Battery compartment
(8) Locking knob of the battery compartment
(9) Locking mechanism of the battery pack
(10) Charging socket
(11) Battery warning
(12) Laser warning label
(13) 5/8" tripod mount
(14) Serial number
(15) Charging connector
(16) Mains plug of the battery charger
(17) Battery charger
Laser receiver
(18) Battery compartment cover locking mechanism
A)
(19) On/off button
(20) Button for adjusting the reception accuracy
A)
(21) Audio signal button
A)
(22) Magnets
A)
(23) Centre mark
(24) Laser beam reception area
A)
(25) Display (front and back)
A)
(26) Spirit level
A)
(27) Speaker
A)
(28) Serial number
(29) Battery compartment cover
A)
(30) Mount for holder
A)
(33) Rotary knob of holder
(34) Fastening screw of the holder
A)
(35) Holder
(36) Centre line reference on the holder
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
A)
A)
A)
A)
A)
A)
Bosch Power Tools