General Description - Philips HR2831 Gebrauchsanweisung

English
Important
• Read the instructions in conjunction
with the illustrations before using the
appliance.
• Do not allow children to operate the
appliance.
• Care must be taken when handling the
metal blade and the inserts as these are
very sharp.
• Always remove the protective cap from
the metal blade before use. Always click
it back into place after cleaning.
• Let the rotating parts come to a
complete stop before opening the cover.
• Never put your fingers in the food chute,
nor use forks, knives, spatulas, spoons
etc. Only the provided pusher is suited
for this purpose.
• Remove the mains plug from the wall
socket after use.
• If the mains cord of this appliance is
damaged, it must only be replaced by
Philips or their service representative, as
special tools and/or parts are required.
• Prior to initial use, wash all the parts
which come into contact with food.
• Do not place the bowl into a microwave
oven.
• Never immerse the motor unit in water
or any other liquid.
Do not rinse either.
• Please note that 0.75 litre is the
maximum quantity for mixing or
blending fluids.
• Do not exceed the maximum quantities
and processing times indicated in the
table and the recipes.
• Keep these instructions for future
reference.

General description

A
M ("Moment") button
Press: motor runs.
Release: motor stops.
B
Control ring
1
for removing and placing the lid.
The lid release buttons (D) are now retracted
2
O/M for "Off" position and "Moment" position
for pulse operation.
I for continuous operation.
C
Motor unit
D
Lid release buttons
E
Pusher
F
Filling opening
G
Lid
H
Coupler
I
Bowl
J
Cord clip (service n°. 4822 290 40369)
£
K
Metal blade
L
Insert holder disc
(service n°. 4203 065 61521)
M
Slicing insert medium
(service n°. 4203 065 61541)
N
Shredding insert medium
(service n°. 4203 065 61561)
O
Spatula (service n°. 4822 690 40212)
Automatic Safety Shut-Off
Please read these instructions carefully before
using the appliance.
To prevent the hazard of damage due to overheating,
your appliance is equipped with an automatic safety
device which will automatically shut-off the mains
power if necessary.
If the instructions below are followed strictly you can
safely switch on again after a one hour cooling-down
period.
If the appliance suddenly stops:
1. First remove the mains plug from the wall
socket.
2. Secondly set the control ring to position O/M.
3. Allow a cooling-down period of min. one hour.
Contact your Philips dealer or an authorised Philips
service centre if the safety shut-off is activated
repeatedly.
4
(fig. 1)
(service n°. 4822 690 40232)
f
g
h
(resettable)