Listening To The Radio; Changing Mw Channel Step - Sony ICF-SW7600GR Bedienungsanleitung

B Listening to the radio

Changing MW Channel Step

The MW channel step differs depending on the area as shown in the table
below. Select the channel step according to your area.
Channel step according to area
Area
North and South American countries
Other countries
2
1
Press POWER ON/OFF to turn off the radio.
2
Press DIRECT.
Perform Step 3 within 10 seconds. Otherwise, the unit will return
to the condition prior to Step 2. In this case, repeat from Step 2. In
addition, perform steps after Step 3 within 10 seconds as well.
3
Enter the channel step using the number buttons.
To enter 9 kHz, press 9 and to enter 10 kHz, press 1 and 0.
4
Press EXE to finish operation.
The entered channel step will flash for about
3 seconds and the unit will return to the
clock display.
Two short beeps will be heard when
entering numbers other than "9" and "10".
In this case, repeat from Step 2 after
returning to the clock display.
Channel step
10 kHz
9 kHz

Listening to the radio

1
3
4
15
GB