To Set Up An Ip Address; Please Enter The Ip Address Of The Device (A.b.c.d); Please Enter The Ip Subnet Mask (A.b.c.d Or /Nn); Finally, Set Up The Gateway. Please Enter The Ip Address Of The Gateway From Which This Network Is Reachable (E.g. 192.168.1.1) - Dell PowerConnect 6200 Serie Erste Schritte

default VLAN (VLAN #1), of which all ports are members. This is the
gateway from which this network is reachable (e.g. 192.168.1.1):
configuration, and copy to the start-up configuration file. If the
information is incorrect, select (N) to discard configuration and
Thank you for using the Dell Easy Setup Wizard. You will now enter
Downloaded from www.Manualslib.com
Next, an IP address is set up. The IP address is defined on the
IP address you use to access the CLI, Web interface, or SNMP

Please enter the IP address of the device (A.B.C.D):

Please enter the IP subnet mask (A.B.C.D or /nn):

Finally, set up the gateway. Please enter the IP address of the

This is the configuration information that has been collected:

SNMP Interface = "Dell_Network_Manager"@192.168.1.10

Management IP address = 192.168.1.100:255.255.255.0

If the information is correct, please select (Y) to save the
manuals search engine
interface for the switch.

To set up an IP address:

192.168.1.100<Enter>
255.255.255.0<Enter>
192.168.1.1<Enter>

User Account set up = admin

Password = **********

Gateway = 192.168.1.1

restart the wizard: [Y/N] y<Enter>
‫מדריך תחילת העבודה‬
3 : ‫שלב‬
4 : ‫שלב‬
5 : ‫שלב‬
CLI mode.
| 274