Herunterladen Diese Seite drucken

Dell PowerConnect 6200 Serie Erste Schritte Seite 254

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 98
Adm 1:
The system is not configured for SNMP management by default. To manage the
switch using SNMP (required for Dell Open Manage Network Manager) you can:
o Set up the initial SNMP version 1 & 2 now.
o Return later and set up other SNMP accounts. (For more information on
setting up an SNMP version 3 account, see the user documentation).
Would you like to configure the SNMP management interface now? [Y/N]
y<Enter>
To configure the SNMP management account you must specify the management
system IP address and the "community string" or password that the particular
management system uses to access the switch. The wizard automatically
assigns the highest access level [Privilege Level 15] to this account. You
can use Dell Open Manage Network Manager or other management interfaces to
change this setting and to add additional management systems later. For more
information on adding management systems, see the User's Guide.
To add a management station:
Please enter the SNMP community string to be used {Dell_Network_Manager}:
Dell_Network_Manager<Enter>
NOT:
Yaplandrlmsa, varsaylan eriim seviyesi SNMP yönetim arayüzü için mümkün olan en yüksek eriim
seviyesidir. Balangçta sadece SNMPv1/2c aktif edilecektir. SNMPv3 için güvenlik eriimini yaplandrmak üzere
geri dönene kadar SNMPv3 devre ddr (örnein motor ID, görüntüleme vs.).
Please enter the IP address of the Management System (A.B.C.D) or wildcard
(0.0.0.0) to manage from any Management Station {0.0.0.0}:
192.168.1.10<Enter>
Adm 2:
Now we need to configure your initial privilege (Level 15) user account.
This account is used to login to the CLI and Web interface. You may set up
other accounts and change privilege levels later. For more information on
setting up user accounts and changing privilege levels, see the User's
Guide.
To set up a user account:
Please enter the user name {admin}: admin<Enter>
Please enter the user password: ********<Enter>
Please reenter the user password: ********<Enter>
NOT:
Birinci ve ikinci parola ayn deilse, ayn girilene kadar kullancdan istemde bulunulur.
252
Başlangıç Kılavuzu
Downloaded from
www.Manualslib.com
manuals search engine

Werbung

loading