Removing Jammed Staples; Maintenance; Optional Accessories - Makita DST112Z Betriebsanleitung

Checking remaining staples
► Fig.15: 1. Sight window 2. Pusher 3. Staples
Remaining staples can be checked through the sight
window.
Reload staples when no remaining staples can be seen
in the sight window.

Removing jammed staples

WARNING:
Always make sure that the battery
cartridge is removed before removing jammed
staples.
Open the sub magazine backward and take out jammed
staples from the opening for firing.
► Fig.16: 1. Opening 2. Sub magazine

MAINTENANCE

CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Staples
• Makita genuine battery and charger
• Safety goggles
• Depth adjuster set
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
9 ENGLISH