Taurus CUTMASTER Handbuch Seite 7

CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- During the cleaning process, take special care
with the blades, as they are very sharp.
- It is advisable to clean the appliance regularly
and remove any food remains.
- If the appliance is not in good condition of
cleanliness, its surface may degrade and
inexorably affect the duration of the appliance's
useful life and could become unsafe to use.
- Neither parts of this appliance are suitable for
cleaning in the dishwasher.
- Then dry all parts before its assembly and
storage.
REMOVABLE BLADE FOR EFFECTIVE
CLEANING
- The blade can be removed for cleaning. To do
so, unscrew the the plastic bold in the center of
the blade (Fig 1.).
- With a soft sponge or cloth, clean both sides of
the blade with soap and water. Rinse and dry
the blade.
- After cleaning, install the blade again in its
palce.
Manual Cutmaster Ver V.indb 7 21/6/19 12:03