Charging The Blackbox - ECTIVE BlackBox Bedienungsanleitung

Charging the BlackBox

Charging with the charger
Connect the supplied charger to an AC outlet and then connect it to the
DC/Solar charging port on the back of the BlackBox
(Maximum charging power: 72W)
Charging with a solar module
Connect the charging cable to the solar module and then connect it to
the DC/Solar charging connector on the back of the BlackBox (maximum
charging power: 72W)
The solar module must meet the following requirements:
• Output voltage: 5 to 24V DC
• Charge controller: PWM
• Connection: DC Male Connection
The charge level is shown on the display
ECTIVE BlackBox 21