ECTIVE BlackBox Bedienungsanleitung Seite 25

Direct current
Press the DC button to activate the DC connections A signal tone sounds
and the display shows "DC ON" The DC output connectors (USB ports,
DC 12V outputs, DC 12V vehicle power socket and Jump Starter connec-
tor) are now activated
Pressing the DC button again deactivates the power supply to the DC
ports and the display shows "DC OFF"
Starting a car with the BlackBox
• Connect the cable with the EC5 connector (sold separately) to the
corresponding "Jump Starter" output of the BlackBox
• Connect the plus and minus terminals to the plus or minus pole of
the car battery (red to plus, black to minus)
• Start the BlackBox and press the DC button
• Start the car
• Disconnect the terminals from the battery and then remove the
cable from the Black Box
ECTIVE BlackBox 23