Standards And Approvals - Epson TM-U230 Bedienungsanleitung

English
lps: lines per second, cpi: characters per 25.4 mm (characters per inch)
Inch values are approximate.
*1: Be sure to use a safety-standards-applied power source that meets the following

Standards and Approvals

The following standards are applied only to the printers that are so labeled. (EMC is tested using the Epson power
supplies.)
Europe:
North America: FCC/ICES-003 Class A
Oceania:
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user
may be required to take adequate measures.
The connection of a non-shielded printer interface cable to this printer will invalidate the EMC standards of this
device.
You are cautioned that changes or modifications not expressly approved by Seiko Epson Corporation could void your
authority to operate the equipment.
CE Marking
The printer conforms to the following Directives and Norms:
Directive 2004/108/EC EN 55022 Class A
FCC Compliance Statement For American Users
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be
required to correct the interference at his own expense.
For Canadian Users
This Class A digital apparatus complies with Canadian ICES-003.
vi
Downloaded from www.Manualslib.com
Paper thickness 0.06 ~ 0.085 mm {0.0024 ~ 0.0033"}
Inked ribbon ERC-38 (Black, Black/Red)
Ribbon life Black: 3,000,000 characters, B/R: 1,500,000 characters (Black),
750,000 characters (Red)
Interface (compatible) RS-232 / Bi-directional parallel / 10 Base T I/F
Dealer option: USB
Data buffer 1 KB/16 KB
D.K.D. function 2 drives
*1
Power supply DC +24 ~ +34 V
Current consumption Operating: 38 W avg. Standby: 3 W avg.
Temperature Operating: 0 to 50 °C {32 to 122 °F}
Storage: –10 to 50 °C {14 to 122 °F}
Humidity 10 to 90% without condensation
Reliability MTBF: 180,000 hours, MCBF: 18,000,000 lines
259.5 × 166 × 168 mm {10.21 × 6.54 × 6.61"} (H × W × D)
Overall dimensions
Weight (mass) Approximately 2.8 kg {6.2 lb}
specifications. Rated output: 24 V/2.0 A or more, Maximum output: 240 VA or less
CE marking
AS/NZS CISPR22 Class A
EN 55024
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
manuals search engine
WARNING
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-11