Status Indicators; Mounting Options - Asus WL-520GU Schnellstartanleitung

2) Status indicators

PWR (Power)
AIR (Wireless Network)
WAN (Wide Area Network)
LAN 1-4 (Local Area Network)

3) Mounting options

Out of the box, the ASUS WL-520GU/GC Broad
Range Wireless Router is designed to sit on a
raised flat surface like a file cabinet or a book shelf.
The unit may also be converted for mounting to a
wall or ceiling.
To mount the ASUS WL-520GU/GC
1 Look on the underside for the two mounting
2. Mark two upper holes on a wall or on a raised flat
3. Tighten two screws until only 1/4'' is showing.
4. Latch the hooks of the ASUS WL520GU/GC onto the screws.
Downloaded from www.Manualslib.com
WL-520GU/GC Broad Range Wireless Family Router Quick Start Guide
WL-520GU
125M High Speed
Off No power
On System ready
Flashing-slow Firmware upgrade failed
Flashing-quick EZsetup processing
Off No power
On Wireless system ready
Flashing Transmitting or receiving data (wireless)
Off No power or no physical connection
On Has physical connection to an Ethernet network
Flashing Transmitting or receiving data (through Ethernet cable)
Off No power or no physical connection
On Has physical connection to an Ethernet network
Flashing Transmitting or receiving data (through Ethernet cable)
hooks.
surface.
Note: Re-adjust the screws if you cannot latch the ASUS Wireless Router onto the
screws or if it is too loose.
manuals search engine
LAN
AIR WAN
PWR
R
AIR WAN LAN1 LAN2 LAN3 LAN4
3