Ariete 2774 Evo 2 in 1 Handbuch Seite 9

ATTACHMENTS
Brush for floors / carpets (L)
- Suitable for cleaning both of wide spaces and corners hard to reach.
- When cleaning carpets and though floors, never use the brush. The brush is equipped with wheels
to facilitate the smoothness on every kind of surfaces. Select the required position of the bristles
by pressing the lever at the end of the brush. To lift the brush, press the switch lever marked with
the symbol
- For a better cleaning and keeping of the smooth floors, as PVC, parquet or tiles, it is recommended
to use the brush. To remove the brush, press the switch lever marked with the symbol
smooth floors.
- It cannot be removed from the appliance body (M).
Vacuum cleaner with brush (G) - for handheld vacuum cleaner only
Suitable for cleaning surfaces and working tables, as well as couches and fabrics.
Crevice nozzle (H) - for handheld vacuum cleaner only
Suitable for cleaning corners, crevices or areas hard to reach.
HOW TO OPERATE
- Plug the appliance into a mains power socket.
- With the handheld part (C) properly assembled in the appliance body (M), press the switching on
button (B) situated on the removable body (C) and tilt the handle backwards in the standard posi-
tion of use (Fig. 2).
- Clean the wide surfaces by pushing with the brush (L) forwards.
This allows the vacuum cleaner to collect the fragments and the dirt on the floor.
- For cleaning the corners and small surfaces, rotate the broom in the opposite direction. The frag-
ments and dirt can be moved to be collected.
ATTENTION: switch the broom off immediately when something remains stuck inside the brush, as
some fabric, carpet fringes, etc.
- After cleaning, switch the broom off by pressing the switching off button (B) once more.
Handheld vacuum cleaner
- By holding the handle of the appliance body (M), press the unlocking button (A) and remove the
handheld vacuum cleaner complete with power cord (Fig. 3).
- At the end of the dust container (F), apply the required attachment (Fig. 4); press the switching on
button (B) to start the appliance by means of the apposite handle (Fig. 5).
- For positioning the handheld vacuum cleaner back into the appliance body (M), remove the
installed attachment first, by removing it outward and then position the end of the dust container
(F) in the lower side of the apposite housing in the appliance body (M) and slightly push backward
the handheld vacuum cleaner until it clicks into place (Fig. 6).
WARNING: Make sure the handheld vacuum cleaner is properly installed before proceeding
with a new use.
of the carpet.
- 7 -
EN