Operations; Setting The Source To Be Played; Using The [Browse] Button - Pioneer CDJ-850 Handbuch

Operations

Setting the source to be played

e f i j
d
PC
c
USB
b
STOP USB
DISC
1
1 / 16
TIME AUTO
MODE CUE
2
1 / 8
I
Loading discs
! Set the disc with the printed side facing up.
! Insert the disc horizontally into the disc insertion slot in the main
unit's front panel.
! Do not load more than 1 disc.
! Do not force discs into the set's disc insertion slot when the set's
power is off. Doing so could damage the disc or the set.
! When the disc is being drawn in or ejected, do not apply any force
to the disc in the direction opposite its movement. Doing so could
damage the disc or the set.
1 Press [u] C.
Turn on the power of this unit.
2 Load the disc in the disc insertion slot I.
Playback starts.
! When auto cue is turned on, playback starts when
[PLAY/PAUSEf] is pressed. For details on the auto cue function,
see Setting auto cue on page 20.
Ejecting discs
Press [h DISC EJECT] r.
The disc is ejected from the disc insertion slot.
! If [DISC EJECT h] is pressed accidentally, press [PLAY/PAUSEf]
immediately to return to the status directly before [DISC EJECT h]
was pressed. (No sound is output during this time.)
About ejecting discs by force
! If the disc is not ejected when [DISC EJECT h] is pressed, the disc
can be ejected forcibly by inserting the disc force eject pin into the
disc force eject pin insertion hole on the main unit's front panel.
! When forcibly ejecting a disc, be sure to do so following the proce-
dure below.
16
En
k l m n o
UTILITY
BACK TAG TRACK
/REMOVE
BROWSE TAG LIST INFO MENU
J C
1 Press [u] C to turn this unit's power off, then wait at
least 1 minute.
Never forcibly eject a disc directly after turning off the set's power.
p
Doing so is dangerous for the reasons described below.
The disc will still be spinning when ejected and could hit your
!
STANDBY
fingers, etc., causing injury.
DISC EJECT
r
Also, the disc clamp will rotate in an unstable way, and the disc
!
could get scratched.
VINYL
SPEED ADJUST
2 Use the included disc force eject pin. (Do not use
anything else.)
The included disc force eject pin is mounted on the CDJ-850's bottom
panel. When the pin is inserted all the way into the insertion hole, the
disc is ejected 5 mm to 10 mm out of the disc insertion slot. Grasp the
disc with your fingers and pull it out.
Loading USB devices
Connect the USB device to the USB device insertion slot d.
The USB indicator lights.
Removing USB devices from the set
! Be sure to follow the procedure below when removing USB
devices from the set. Removing a USB device without following
this procedure could erase the set's management data and make it
impossible to read the USB device.
! When turning the set's power off, be sure to remove the USB device
first.
1 Press [USB STOP] b for at least 2 seconds.
The USB indicator turns off.
2 Disconnect the USB device.

Using the [BROWSE] button

When [BROWSE] is pressed, the contents of the medium loaded in this
unit are displayed on the information display section.
Browsing libraries and folders
This displays the loaded tracks, sorted in category or tree structure.
The display on the information display section differs according to
whether or not library information is recorded on the USB device.
— With library information d Library browsing: The music files are
displayed by the categories set in rekordbox (album, artist, etc.).
The category types can be changed in the Preferences (environ-
mental settings) in rekordbox.
— Without library information d Folder browsing: The folders/ tracks
on the medium are displayed with a tree structure.
Contents recorded on discs cannot be viewed in the library browse
mode.
1
Title 01
Title 02
Title 03
2