Backlight Function; Accumulation Function - RIBA RCL Serie Handbuch

Backlight function:

key. The display will show "bl.1" which means "auto backlight" mode.
Press the
N
When the weight is over 10 scale divisions or any of the keys are pressed, the
backlight will be effective. When the weight is zero for about 8 seconds, the
backlight will go off automatically.
Press the same key again. The display shows "bl.2" which means the backlight
will always be on.
Press the same key once more. The display shows "bl.3" which means the
backlight will be turned off.

Accumulation function:

In weighing or counting mode, make it to zero, place the goods. After the display
Σ+
is stable, press the key to enter into accumulation mode. After ccumulation,
total accumulated weight and total accumulation times are shown in display
window in turn.
In accumulation mode, press the same key again to return to earlier operation
mode.
Accumulation error:
When the total accumulation time is more than 99 times or the total accumulated
weight is more than the display range, the scale will give you error message, at
the same time, the current operation is useless.
Clear accumulation:
The memory of accumulation will be cleared automatically when exchange
function mode or exchange weighing units or sample again in counting mode.
In any mode, press the same key, meanwhile also press the key to clear
the memory of accumulation.
.23.