Weighing Mode - RIBA RCL Serie Handbuch

Operations:
Turn on the scale, the scale will be on the weighing mode. Press "func" key to
choose the weighing or counting functions.

Weighing mode:

Press the "func" key to choose the weighing units and the display will be changed
to the new value with units shown. There are two units of weight (Kg/g and lb)
that can be enabled.
Tare function:
Tare weight is the weight of a container and can be subtracted by placing an
empty container on the scale pan. When the display is stable press the
key and the display will become zero.
and the display will have a tare indication. Cancel the tare function by pressing
the same key again with no weight on the scale pan. Tare range is the full
capacity of the scale.
Zero function:
If the zero shifts during operation, press the key to set it to zero. The
zero function is only active over a 2% range.
Counting mode:
After entering into counting mode, press the key to select the sample
size: (10, 20, 50, 100, 200, 500 or 1000 pcs).
Put the sample number on the scale and press the key. When the
Σ+
symbol "c" disappears the sampling procedure is finished and you can start to
use the counting function.
If the unit weight is too small (less than 0,2 or 0,04 d of a scale division), the
display willshow: --or---pcs.
.22.